How it Works :
Breacher Paste serves
as a fire-resistant intermediate between target and explosive breaching
charge. It assists in holding the charge to the target, while still
permitting precise adjustment of the charge or easy removal of the
charge if the shot is aborted. 
For light weight charges,
such as "blue-board", Breacher Paste alone will hold the charge to
target.
For heavier charges
such as HYDRO-CUT or similar, use Breacher Paste plus a prop stick
to hold charge to target. Breacher Paste is an easy to use replacement
for "double sticky" tape, and is far safer than automotive grease.
Breacher Paste may
be used on all types of targets such as wood or metal doors, stucco,
masonry, concrete, etc. and on wet or dry surfaces over a wide temperature
range.
Due to its fire-resistant
properties, Breacher Paste reduces the customary "fireball" when the
explosive charge is detonated.
Breacher Paste is
packaged in soft-sided 5.25 oz. screw-top bottles. The soft sides
allow the contents to be easily applied to the target without undo
contamination of the operator's hands by just squeezing it as you
would a toothpaste tube.
The container size
and type was selected so that it would pack easily and is less susceptible
to damage from impact or mission constraints.
Breacher Paste is
also utilized in the Joint Service Explosive Ordnance Disposal "RON" (Remote Ordnance Neutralization System) Programs. Click
here for more information.
Note:
This product is sold only to Law Enforcement or appropriate government
agencies.
Cage Code 009J2 NSN #s:
5.25 oz. Screw Top bottle NSN. 8040-01-411-8927
5 gallon Pail NSN. 8040-01-411-8928
Order
Breacher Paste
