|
Questions about SMOOTH-KOTE
I cleaned my firearm and
then applied SMOOTH-KOTE to
the interior and the bore. After firing the firearm what do I do?
Simply use a dry nylon bristle
brush such as an M-16 brush or even a toothbrush to brush off the
dirty surfaces (extractor, breech face, feed ramp, slide rails etc.).
To clean the bore, use a dry nylon bristle bore brush followed by
a clean dry patch or two. Once you have cleaned the firearm you can
now use the precision applicator to touch up the wearing surfaces
with SMOOTH-KOTE. Don't forget, because SMOOTH-KOTE bonds to metal,
a little bit goes a long way.
Note:
If you use a bronze or other metal bristle brush to clean it is important
to re-apply a thin coating of SMOOTH-KOTE. The metal bristles scratch
the SMOOTH-KOTE'd surface and these scratches need to be smoothed
out.
|
